Wholesale API TCI rotary tricone rock roller cone drill bits in the stock with discounted price from China factory . Bit Description: IADC: 447 - TCI journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability. Compressive Strength: 65 - 85 MPA 9,000 - 12,000 PSI Ground Description: Long intervals of very soft poorly compacted shales, dolomites, sandstones, clays, salts and limestones. We can offer TCI bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for water well, oil field, gas well,mining,construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the high quality products at the lowest possible price. Tungsten Carbide Insert bit IADC447 6 1 /2 inches (165mm) is for soft and medium formation. The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rring provides adequate sealing for bearing durability.| Basical Specification | |
| Size of Rock Bit | 6 1/2 inches |
| 165.10 mm | |
| Bit Type | TCI Tricone Bit |
| Thread Connection | 3 1/2 API REG PIN |
| IADC Code | IADC 447G |
| Bearing Type | Journal Sealed Bearing with Gauge Protection |
| Bearing Seal | Elastomer/Rubber |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling, high temp drilling, deep drilling, motor drilling |
| Operating Parameters | |
| WOB (Weight On Bit) | 13,032-33,255 lbs |
| 58-148KN | |
| RPM(r/min) | 150~70 |
| Formation | Very soft formation with low compressive strength and high drillability, such as clay, mudstone, salt, soft limestone, etc. |
