Wholesale API milled tooth sealed tricone roller cones bits in the stock based on the lowest price and excellent quality from China factory Bit Description: IADC: 126 - Steel tooth journal sealed bearing bit for soft formations with low compressive strength and high drillability. Compressive Strength: 0 - 35 MPA 0 - 5,000 PSI Ground Description: Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals. We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.
Depending on the cutting material, tri-cone bits can be divided into TCI bits and steel tooth bits. TCI IADC126 is suitable for very soft formations. It is very important to choose the right rock drill bit before starting the project. In drilling engineering, Far East has 15 years and more than 30 countries of service experience, and we have advanced equipment and auxiliary inspection and testing devices. We strictly comply with API specifications and ISO 9001:2015 standards, and we are committed to providing optimized solutions for a variety of applications and requirements. If you can provide us with specific conditions such as rock hardness, type of drilling rig, rotation speed, weight and torque of the bit, we can provide an engineer's solution. It also helps us find the right bit when you tell us about vertical drilling, horizontal drilling, oil well drilling, no-dig drilling or foundation piling.| Basical Specification | |
| Size of Rock Bit | 9 1/2" |
| 241.3 mm | |
| Bit Type | Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
| Thread Connection | 6 5/8 API REG PIN |
| IADC Code | IADC 126 |
| Bearing Type | Journal Sealed Roller Bearing |
| Bearing Seal | Rubber Seal |
| Heel Protection | Unvailable |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | 3 |
| Operating Parameters | |
| WOB (Weight On Bit) | 16,266-46,087 lbs |
| 72-205KN | |
| RPM(r/min) | 60~180 |
| Formation | Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc. |
Choose the correect and suitable IADC code to reach the best cost-effective, we are pleasant to choose the right tricone bits according to your geological information. 9 1/2" is always used in exploration, water well drilling and cement plug drilling, it has a central flush hole for mud fluid circulation, the bearing is sealed and thread connection is produced in rules of API 6 5/8 reg pin. The teeth are hard-faced by tungsten carbide, teeth life is very long in drilling mudstone and soft rocks. Far Eastern has customers in more than 35 countries, welcome your inquiry.Drill bits are common in the engineering and drilling industry because they have been widely used as a tool for drilling and cutting rock formations, and significant improvements in drill bit performance have directly reduced drilling costs, especially in the last decade. The two performance indicators, life and drilling speed, which ultimately determine the extent to which the bit affects the drilling cost, improve the mechanical drilling speed and life of the bit is an effective way to reduce drilling costs.
